When using The FloTool RhinoRamps Vehicle Ramp Set # FT11909MI, The car should be in park when you're on top of the ramps. You will need to double check the vehicle's position and make sure everything is aligned so the ramps can support the vehicle's weight.
I attached a review video link below. view full answer...
I may have a solution for you, but we don't have the CargoSmart Arched Loading Ramp Set - Non-Folding - Aluminum - 90" x 12" - 3,000 lbs # 3483070 in a non-arched ramp. The only available flat ramp we have in close to 90" is the Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000 lbs # 325-GH-R96. These are a heavy duty ramp set that is well rated for your race car and comes in an 8 foot long x 15" wide ramp section.
I've linked a review video of these ramps for you to... view full answer...
The Stallion Aluminum Car Hauler Ramp Set item # 288-07502 you were looking at would be the perfect fit for your twin axle trailer. These ramps combined have a 6,000 lbs capacity and only weigh 20 lbs per ramp. They are 5' long x 14-1/2" wide x 3-3/4" thick and will work on a trailer up to 16" off the ground. view full answer...
Yes, I do believe we have something for you - check out the Gen-Y Hitch Aluminum Loading Ramp Set # GY52YR. This loading ramp measures 10' long, 15" wide (each ramp), and has a beefy 14,000 lb weight capacity so it'll be enough to load whatever you need. view full answer...
We have options for loading ramps for a trailer to load up your vehicle, but none that are 10 inches or keep the front end up for door clearance when towing. Each of the available ramps hook onto the trailer and need to be removed after use; they are different lengths, widths, and capacities so you can get the one that will work for your vehicle.
- 72" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72
- 84" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum... view full answer...
While we do have the ramp you need that is similar to the Aluminum Car Hauler Ramp Set - 60" x 14-1/2" - 6,000 lbs # 288-07502, they only come as a set of 2. Unfortunately, we do not carry these ramps that come with a quantity of 1. view full answer...
I may have a solution for you, but the Gen-Y # GY96FR ramps only come as wide as 15". There is not a ramp with a similar 6,000-lbs total (combined) but you could get a wider ramp with the Loading Ramp Set - Aluminum - 65" Long x 20-1/2" Wide - 3,000 lbs - Qty 2 # 288-07489, which is 20-1/2" wide. The only downside to going this route is that these ramps only have a 3k capacity (combined).
There is a 15" wide Gen-Y ramp set with the Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15"... view full answer...
We do have a wide variety of loading ramp selections for you to choose from! I like the Aluminum Car Hauler Ramp Set - 60" x 14-1/2" - 6,000 lbs # 288-07502 because the aluminum construction makes them lightweight (20 lbs per ramp) and resistant to the elements so you don't have to worry about rust.
Attached is a review video of this ramp set for you to check out as well as our selection of loading ramps to filter through if you might want something else. view full answer...
The Erickson Arched Loading Ramp Set # EM07435 are a great chioce for loading a wheel chair. They'll support up to 1,000 between the two of them and fold up to be only 26-1/2 inches long for storge. I've attahced a review video on the rams for you to take a look at. view full answer...
Per the manufacturer The Replacement Winch Control Box for Detail K2 Snowplows # K2WCB is the correct replacement box needed for your DK2 Avalanche 8422.
FITS: AVAL8219 / AVAL8422 / AVAL8826 / AVAL8219ELT / AVAL8422ELT / AVAL8826ELT / RAMP8219 / STOR8422 / SUMM8826 / RAMP8219ELT / STOR8422ELT / SUMM8826ELT.
The controller box connects to the car battery to supply power to the winch.
I attached a review video link below. view full answer...
For your 2018 Chevrolet Cruze, I recommend checking out the:
-20x47 Reese Cargo Carrier for 1-1/4" Hitches - Steel # 63155.
This is a cargo carrier measures 49-1/2" long x 21-1/2" wide x 5-1/2" tall, has a maximum weight capacity of 300-lbs, and will fit into any class I and class II trailer hitch.
As far as a ramp also being available, that is not going to be an option, unfortunately.
Finally, if you're also needing a trailer hitch for your Cruze, I recommend the Draw-Tite Sportframe... view full answer...
I would be happy to help you find a bike rack for your two e-bikes and a receiver hitch for your 2013 Suzuki SX4. The bike rack you referenced, the Yakima OnRamp Bike Rack for 2 Electric Bikes item # Y96FR, is not compatible with class 1 hitch receivers which is all that is available for your vehicle. I recommend the Kuat NV 2.0 Base 2-Bike Platform Rack - 1-1/4" Hitches item # BA12B. It has a weight capacity of 66 lbs per bike, a maximum tire width of 3.25", maximum wheelbase of 50", and... view full answer...
The easiest solution is to use a tow dolly to transport your 2010 Honda Accord with your 2000 Ford F-150. I recommend checking out the:
-Demco Kar Kaddy SS Tow Dolly with Disc Brakes # DM9713045.
This tow dolly has a maximum weight capacity of 4,800-lbs, disc brakes, easily plugs into your existing 4-pole, and a foldable ramp for ease of storage.
Attached is a review video for you to check out as well. view full answer...
Our most popular motorcycle carrier is the etrailer # e98873. It has a 39-3/8 inch ramp to make it easier to load the bike. The maximum weight capacity is 500 pounds.
If your 2003 Crown Victoria doesn't already have a hitch you'll need Class III, 2 inch hitch receiver. I suggest the Curt # 13707 because it has a higher capacity than the Draw-Tite. You'll want to check your car's owner's manual for it's capacity because you'll be limited by the lowest rated component. view full answer...
For your Buick Enclave, the Roadmaster Dual Hitch Receiver # RM-077-4 you mention will work fine being flat towed behind your 2014 Jayco Greyhawk. This product has a GTW of 10,000-lbs, and should only be used for flat towing situations, as it is not rated for trailer towing.
Additionally, this product will reduce the tongue weight capacity of your hitch by 50%.
As far as a bike rack goes, the Yakima OnRamp Bike Rack for 2 Electric Bikes # Y36FR is a great option, and can support up to... view full answer...
Currently the Curt Trailer Hitch Receiver # C11351 is the only trailer hitch receiver I see which will fit your 2007 Kia Optima still in production. This is only a class I rated receiver which carries a maximum load capacity of 200lbs. The only way you would be able to haul your mobility scooter with your Optima would be by loading it on a small utility trailer. This would require a Ball Mount # C45147 as well as 4-Way Wiring # HM11143935 to be able to tow. view full answer...
We have several hitch mounted motorcycle carriers like you're describing. I've linked them on this page for you. All of them are for 2 inch, Class III trailer hitch receivers because of the amount of tongue weight that is required to carry a motorcycle. Most vehicles that only have Class I or Class II hitches cannot handle the amount of weight of a bike.
Our most popular motorcycle carrier is the etrailer # e98873 which can handle up to a 500 pound bike. However, like I said before,... view full answer...
We can help you with a hitch receiver and scooter carrier for your 2004 Toyota Corolla.
Light-duty Class I hitches are the only option for your car, Curt # C11265 and Draw-Tite # 24913. Both offer the same weight ratings and no-drill installation but the Draw-Tite does NOT req view full answer...
Yes, you will be able to carry a motorcycle on your 2022 Subaru Ascent. First you will need to install The etrailer Trailer Hitch Receiver # e55ZR.
This trailer hitch has a bolt-on installation with no welding required. It has a matte black powder coat finish over a protective base coat that offers a superior rust resistance. The trailer hitch has a maximum tongue weight up to 750 pounds. I recommend checking your vehicle's manual to find out the proper tongue weight capacity of your vehicle.... view full answer...
When it comes to using a tow dolly for your 2020 Ford Escape I recommend The Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 pounds # DM9713045.
This galvanized tow dolly features hydraulic disc brakes for safe controlled stopping and folding ramps for compact storage. It fits towed vehicles with a tread width between 42 inches and 76 inches. This dolly is ideal for cars with front-wheel-drive automatic transmissions. There is a maximum vehicle weight up to 4,800 pounds.... view full answer...
Go To Results